sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon
sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon
sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon
sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon
sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon

sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon

İndirim Oranı : %12 İndirim
Fiyat : ₺4.783,92(KDV Dahil)
İndirimli : ₺4.221,11(KDV Dahil)
₺793,29 'den başlayan taksitlerle

 

 

 

sE Elektronics X1 A Geniş Diyaframlı Condenser Mikrofon

 


ALL-METAL HOUSING and PREMIUM FINISH
Unlike the cheaply constructed bodies of some other "entry-level" microphones, the X1 A's all-metal chassis provides efficient rejection of any electrical interference and noise - and the high-quality finish ensures a great look for years to come.

 


INTEGRATED WINDSCREEN
Eliminates the need for an external pop filter, and provides an extra layer of safety and security for the all-important capsule.

 


COMPLETELY NEW ACOUSTIC DESIGN
The X1 A's new condenser capsule design is a work of art, delivering stellar sonic performance on any source with incredible speed, accuracy, and well-balanced frequency response.
The electronics have also undergone a complete overhaul, and exhibit better specifications and sound - on and off the test bench - than any other microphone in its class.

 


ATTENUATION and LOW CUT SWITCHES
The -20 dB pad switch on the left provides extended dynamic range, enabling a wide range of applications and close-mic techniques for even the loudest instruments...think super-heavy electric guitars, fortissimo brass instruments, and heavy-footed kick drums.
On the right, the 100 Hz low-cut switch helps eliminate low-frequency rumble or footfall noise, and compensates for excessive bass with close-mic techniques (proximity effect).




 

Paket İçeriği
X1 A microphone
Swivel mic clip
Mic stand thread adapter

 

Teknik Özellikler
Capsule Type: 2/3" Permanently-Biased Condenser
Directional Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Impedance: <50 Ohms
Sensitivity: 20 mV/Pa (-34 dB)
Max SPL: 130 / 150 dB (0 / 20 dB pad, (0.5% THD @ 1kHz)
Signal to Noise Ratio: 78 dB(A)
Equivalent Noise Level: 16 dB(A)
Dynamic Range: 114 / 134 dB (0 / 20 dB pad)
Low Cut Filter: 100 Hz, 6 dB/oct, switchable
Attenuation Pad: 20 dB, switchable
Connectivity: 3-pin male XLR
Power requirement: 48V phantom according to IEC 61938
Recommended Load Impedance: >1K Ohms
Current Consumption: 4.0 mA
Diameter: 58 mm (2.28 in.) x Length: 169 mm (6.65 in.)
Weight: 390 g / 13.8 oz

 


Kullanım Klavuzu


 
 
cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR