Audio-Technica U891Rx Switchli Kardioid Kondesner Boundary Mikrofon
Audio-Technica U891Rx Switchli Kardioid Kondesner Boundary Mikrofon
Audio-Technica U891Rx Switchli Kardioid Kondesner Boundary Mikrofon

Audio-Technica U891Rx Switchli Kardioid Kondenser Boundary Mikrofon

Fiyat : ₺0,00(KDV Dahil)

Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations

 

Audio-Technica U891Rx Switchli Kardioid Kondenser Boundary Mikrofon

 

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891Rx cardioid condenser boundary microphone features a touch-sensitive on-off switch that can be set to three modes: press-on/press-off, press to talk, and press to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and an LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; interchangeable elements are available in cardioid, hypercardioid and omnidirectional polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise. The microphone's heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. The unit's self-contained electronics eliminate the need for an external power module.

Designed for surface-mount applications such as sound reinforcement
Ultra-quiet electronic switch
3 operating modes: Touch-on/ touch-off ; Touch-to-talk and Touch-to-mute
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection

 

 

 

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response: 30 - 20,000 Hz
Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
Impedance: 200 ohms
Maximum Input Sound Level: 130 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Switches:
Activation: on/off;
Switch function: press on/off,
momentary on, momentary off;
Flat, roll-off
Dynamic Range: 104 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 68 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 4 mA typical
Weight: 264 g
Dimensions: 108.0 mm (4.25") maximum length, 84.0 mm (3.31") maximum width, 23.0 mm (0.91") maximum height
Output Connector: TB3M-type
Cable: 7.6 m (25.0') long, 3.2 mm (0.13") diameter, 2-conductor, shielded cable with TA3F-type and XLRM-type connectors
Accessories Included: Soft protective pouch

Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
Ultra-quiet electronic switch can be set to any of three operating modes: "touch-on/ touch-off," "touch-to-talk" and "touch-to-mute"
PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone
Superior off-axis rejection for maximum gain before feedback
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Small-diameter UniPoint® capsule near boundary eliminates phase distortion and delivers clear, high-output performance
Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
Low-profile design with low-reflectance finish for minimum visibility

 


Kullanım Kılavuzu

 

 

 

 

 

 

 

Kablolu Mikrofon
Boundary Broadcast (Yayın)
cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR