Audio Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone
Audio Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone
Audio Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone
Audio Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone

Audio Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone

İndirim Oranı : %41 İndirim
Fiyat : ₺19.092,00(KDV Dahil)
İndirimli : ₺11.264,28(KDV Dahil)
₺2.116,93 'den başlayan taksitlerle

Audio Technica PRO35 Kardioid Kondenser Klipsli Enstruman Mikrofonu

Designed for sax, toms, brass and percussion

 

Audio Technica PRO35 Cardioid Condenser Clip-on Instrument Microphone

 

Designed for sax, toms, brass and percussion, 

the PRO 35 excels in high-SPL applications and is ideal for active stage performances. 

Its extended frequency response captures subtle nuances of the performance. 

The included UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. 

The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, 

improving isolation of the desired sound source.

 

UniMount® clip permits accurate positioning, provides shock resistance and protects element

Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

Extended frequency response captures subtle nuances of the performance

6' (1.8 m) cable permanently attached to microphone

 

ELEMENT

Fixed-charge back plate, permanently polarized condenser

 

POLAR PATTERN

Cardioid

 

FREQUENCY RESPONSE

50-15,000 Hz

 

LOW FREQUENCY ROLL-OFF

80 Hz, 18 dB/octave

 

OPEN CIRCUIT SENSITIVITY

-45 dB (5.6 mV) re 1V at 1 Pa

 

IMPEDANCE

250 ohms

 

MAXIMUM INPUT SOUND LEVEL

145 dB SPL, 1 kHz at 1% T.H.D.

 

DYNAMIC RANGE (typical)

115 dB, 1 kHz at Max SPL

 

SIGNAL-TO-NOISE RATIO

64 dB, 1 kHz at 1 Pa

 

PHANTOM POWER REQUIREMENTS

11-52V DC, 2 mA typical

 

SWITCH

Flat, roll-off

 

WEIGHT (MICROPHONE)

0.3 oz (8 g) 

 

WEIGHT (POWER MODULE)

2.9 oz (81 g)

 

DIMENSIONS (MICROPHONE)

0.98" (25.0 mm) long, 

0.40" (10.2 mm) diameter

 

DIMENSIONS (POWER MODULE)

3.66" (92.9 mm) long, 

0.74" (18.9 mm) diameter

 

OUTPUT CONNECTOR (POWER MODULE)

Integral 3-pin XLRM-type

 

CABLE

6.0' (1.8 m) long (permanently attached to microphone), 

0.10" (2.6 mm) diameter, 2-conductor, 

shielded cable with TA3F-type connector

 

ACCESSORIES FURNISHED

AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch

 

AUDIO-TECHNICA CASE STYLE

M12

 

 
Kablolu Mikrofon
Enstruman
cultureSettings.RegionId: 0 cultureSettings.LanguageCode: TR