Türkiye'nin her yerine Ücretsiz Kargo!
Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television and teleconferencing
Audio-Technica ES947 Kardioid Kondenser Boundary Mikrofon
Engineered Sound microphones have been the first choice of leading contractors and system integrators at the highest level of broadcast and installation. Includes UniGuard™ RFI immunity protecting the microphones from any RF interference from mobile phone beeps to laptop buzzes. The discreet size and look of the engineered sound microphone means the best quality of sound is available with the least visibility. Includes gooseneck microphones with interchangeable capsules, ultra low profile boundary, hanging, lavalier clip-on and handheld microphones. This low-profile cardioid condenser boundary microphone ES947 is designed for clear, highly intelligible sound reinforcement, professional recording and teleconferencing in table-, ceiling-, or panel-mount applications. The microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica's UniGuard® innovations. Designed for surface-mount applications Omnidirectional polar pattern with 120º acceptance angle Mounts unobtrusively in table-tops, ceilings and wall panels Isolators provide mechanical dampening of mounting-surface vibration Operates on 9-52V phantom power only UniGuard® RFI-shielding technology
Element Fixed-charge back plate, permanently polarized condenser Polar Pattern Omnidirectional Frequency Response 40 - 12,000 Hz Open Circuit Sensitivity -42 dB (7.9 mV) re 1V at 1 Pa Impedance 200 ohms Maximum Input Sound Level 142 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range 112 dB, 1 kHz at Max SPL Signal-to-Noise Ratio 63 dB, 1 kHz at 1 Pa Phantom Power Requirements 11-52V DC, 2 mA typical Weight 64 g (2.2 oz) Dimensions 69.0 mm (2.72") long, 28.0 mm (1.10") diameter Output Connector Integral 3-pin XLRM-type Accessories Included One pair isolators
Designed for surface-mount applications such as high-quality sound reinforcement, professional recording and teleconferencing For table or ceiling mounting (maximum 45 mm pannel thickness), in 24 mm diameter hole Low-profile element provides uniform omnidirectional polar pattern with 120º acceptance angle Mounts unobtrusively in table-tops, ceilings and wall panels Self-contained power module with XLRM-type output connector Rugged all-metal case with a two-layer steel mesh grille Isolators provide mechanical dampening of mounting-surface vibration Requires 11V to 52V DC phantom power UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Kullanım Kılavuzu
3. kişiye veya Müşterimize teslim edilen ürünün Medu Muzik Market'e gönderildiğine ilişkin kargo teslim tutanağı örneği ile fatura aslının iadesi zorunludur. Bu belgelerin ulaşmasını takip eden Yedi (7) gün içinde ürün bedeli Müşterimize iade edilir.
olarak değişmektedir. Firmamız sizi mağdur etmemek için tedarikçiler ve yetkili servislere gerekli yaptırımı uygulayarak en kısa sürede işleminizi sonuçlandırmaya çalışacaktır.
Internet Explorer tarayıcısının 9.0 ve daha eski sürümlerini desteklememekteyiz. Web sitemizi doğru görüntüleyebilmek için tarayıcınızı güncelleyebilirsiniz, güncelleyemiyorsanız başka bir tarayıcıyı ücretsiz yükleyebilirsiniz.