Jbl Control 25-1L 5.25'' 200 Watt 8 ohm Pasif Duvar Hoparlörü

Marka : Jbl
İndirim Oranı : %36 İndirim
Fiyat : ₺6.960,47(KDV Dahil)
İndirimli : ₺4.454,70(KDV Dahil)
* ₺837,19 'den başlayan taksitlerle

Compact 8-Ohm Indoor/Outdoor Background/Foreground Speaker

 

Jbl Control 25-1L 5.25'' 200 Watt 8 ohm Pasif Duvar Hoparlörü 


5-¼” woofer with woven fiberglass cone

3/4” PEI diaphragm tweeter with fluid cooling

Contemporary, high-design appearance

Built-in InvisiBall® mounting hardware, plus available U-bracket

Weather resistant enclosure and transducers

Wide 100° x 100° coverage

100 Watt power handling (200 Watt program)

High fidelity sound character with broad frequency response of 60 Hz – 20 kHz.

 

Frequency Range (-10 dB) 60 Hz to 20 kHz

Frequency Response (+/-3 dB) 85Hz - 17 kHz

Power Rating2 200 W Continuous Program (2 hrs)

Maximum Input Voltage 25.3 V RMS (2 hrs), 50.6 V peak

Maximum SPL3 110 dB ave. Continuous Pink Noise (116 dB peak)

Sensitivity4 90 dB, 1W/1m (ave. 100 Hz – 10 kHz)

Coverage Angle5 100° x 100°

Directivity Factor (Q) 6.04 (averaged 1kHz – 16kHz)

Directivity Index (DI) 7.6dB (averaged 1kHz – 16kHz)

Nominal Impedance 8 ohms

Crossover Type 2nd order low-pass, 3rd order high-pass

Recommended Protective High-Pass6 60 Hz high-pass (24 dB/oct)

Low Frequency Driver 135 mm (5.25 in), woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection, high-temp fiberglass voice coil former, high-temp voice coil wire, optimized cone geometry, linear suspension spider, and FEA optimized motor structure.

High Frequency Driver 19 mm (0.75 in) PEI diaphragm, low-viscosity ferro-magnetic fluid, and lightweight Kapton™ voice coil former.

Enclosure Material High Impact Polystyrene (HIPS), painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.

Grille Highly zinc-plated, finished in durable TGIC polyester powdercoating. MTC-25WMG-1 (&-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.

Installation InvisiBall wall-mounting system included. Two 6 mm attachment points (on top and bottom) for optional MTC-25UB-1 (&-WH) U-bracket. Secondary safety attachment loop point on back panel.

Environmental IP-44 per IEC529 (IP-55 when installed with the optional MTC-25WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3 panel cover.) Exceeds MilSpec 810 for humidity, salt-spray, temperature & UV. Passes MilStd-202F for salt spray and ASTM G85 for acid-air plus salt spray. Optional MTC-25WMG-1 WeatherMax™ grille for breaking up driving rain and for especially difficult environments.

Termination Screw-down terminal strip, zinc-plated copper based, nickel-plated metal screws and washers. Accepts up to 9 mm outside 4 mm inside open lugs (#6, #8, or #10 lug), plus bare wire (up to 12 AWG / 2.5 mm2). Optional MTC-PC2 and MTC-PC3 protective panel covers available to provide sealed entrance for additional weather protection.

Agency Rating ROHS-compliant

Colors Black (RAL9004) or white (-WH, RAL9016)

Dimensions (H x W x D)7 243 x 188 x 145 mm (9.6 x 7.4 x 5.7 in); 203 mm (8.0 in) deep total when mounted on InvisiBall wall-mount bracket.

Net Weight 3.0 kg (6.7 lbs)

Shipping Weight 7.3 kg (16.0 lbs) for the pair-pack (for 2 speakers)

Included Accessories InvisiBall™ wall-mounting system, 6 mm x 100 mm hex key

Optional Accessories MTC-25UB-1 – Yolk-type U-bracket (&-WH)

 

 

inç
5 inç
Impedance
4-16 ohm
Aktif-Pasif
Pasif